Our Products

K-01
Seven piece single acting sealing set which consists of one reinforced cotton fabric backup ring, one thermoplastic header ring, three reinforced cotton fabric middle rings, and two elastomeric nitrile rubber middle rings.

K-03
Three piece single acting sealing set which consists of one reinforced cotton fabric backup ring, one elastomeric nitrile rubber middle ring, and one thermoplastic header ring.

K-06,09,10,11,27
Single acting wiper ensuring that foreign particles are not introduced into the hydraulic systems, avoiding wear and damage to all the internal components including seals.

K-07
Single acting wiper ensuring that foreign particles are not introduced into the hydraulic systems, avoiding wear and damage to all the internal components including seals.

K-12
Double acting pneumatic piston seal designed to work in low axial housing heights.

K-17
Single acting pneumatic piston seal designed to have asymmetrical profile with shorter and thinner dynamic lip.

K-15
Two piece double acting sealing set which consists of a special designed polyurethane seal ring and an o-ring as energizing element.

K-16,18,42,46,518
Three piece double acting compact seal which consistsof one fabric reinforced elastomeric sealing element and two thermoplastic guide back-up rings.

K-19
Double acting pneumatic piston seal designed to work in low axial housing heights.

K-21,23,31,33,38
Single acting piston – rod seal and designed to have symmetrical lips in order to be used both for rod and piston applications.

K-22
Single acting rod seal designed to have inner lip shorterthan the outer lip in order to be used for rod applications.

K-25
Double acting piston sealing elements formed by vulcanizing metal disc and rubber material together with special methods.

K-26
Double acting complete piston seal which consists of a steel plate vulcanized with elastomeric nitrile rubber using special production methods. The sealing lips do have springs in order to increase the preload.

K-30
Single acting wiper seal combination which consists of a metal vulcanized with elastomeric nitrile rubber using special production methods.

K-35
Single acting pneumatic piston seal designed to have asymmetrical profile with shorter and thinner dynamic lip.

K-49
Two piece double acting sealing set which consists of a special design polyurethane seal ring and a NBR elastomer ring as energizer.

K-50
Single acting pneumatic piston seal designed to have asymmetrical profile with shorter and thinner dynamic lip.

K-51
Single acting pneumatic rod seal specially designed not to require additional element for axial fitting within the housing.

K-53
A pneumatic cushioning seal with special design spacer lug and flow passages to cushion at the end of the stoke in pneumatic cylinders.

K-54
Double acting pneumatic piston seal designed to be used in low axial housing grooves.

K-56
Two piece single acting pneumatic rod seal which consists of one nitrile rubber sealing element and one polyester elastomer scrapper profile ring.

K-57
Double acting complete piston seal which consists of an aluminum plate vulcanized with elastomeric nitrile rubber using special production methods.

K-58
Five piece double acting sealing set consists of aluminum body, two elastomeric sealing elements, one guide ring, onemagnet and an O-ring for the inner sealing.

K-59
Single acting pneumatic piston seal designed to have asymmetrical profile with shorter and thinner dynamic lip.

K-62
Double acting pneumatic piston seal designed to work in low axial housing heights.

K-63
Double acting pneumatic piston seal designed to work in low axial housing heights.

Rotex Coupling
Jaw-type coupling for torque transmission and damping of torsional vibrations.

BFT & PRF Strips
Low friction and wear resistance strips that have non-marring protective cover, and produce minimum noise. Moreover, these products have exceptionally smooth surface finish without any ram lines.

DHS
Extremely effective in nature and is rigid in construction which makes it highly suitable for fitting in machines for providing an optimum seal.

Dowty Seal
rubber sealing element that is bonded to the inner wall of a metal washer. They are used in applications where high pressures demand greater sealing capacity that can be obtained with Copper washers.

GR Washer
Spider couplings enable the connection of shafts or flanges via a polyurethane drive ring.

GS Rotex Washer

GS Rotex Washer 90 Hardness

H Series Washer

HRC Washer

Korean Washer

MT Rubber Washer

MT Washer

NM Washer

PU Star Washer

Rotex Washer

SW Washer

SBT Washer

Rotex Washer 2

M T Star Washer
We can provide various kind of M T Star washers as per the requirments of the clients.

Insulation Mat
Electrical Insulating Mat for electrical purpose has different used in various applications like as power plants, high voltage panels, substation, HT and LT Labs and power transmission room.

SOG VA
Used in components with oscillating or rotating parts to keep lubrication fluids in while preventing ingress of mud and water.

SOG VS
used in components with oscillating or rotating parts to keep lubrication fluids in while preventing ingress of mud and water.

SOG WIPER
These are basically an all-rubber seal, which mounts directly on the shaft and seals axially against the counter-face, housing, bearing race, and similar surfaces.

T-25
Double acting pneumatic piston seal designed to work in low axial housing heights.

UHS_UNS_UNR
Single acting pneumatic piston seal designed to have asymmetrical profile with shorter and thinner dynamic lip.

Oil Seals
Metal inserted with spring retainer, Metal outer (Metal Claded) Seals, NBR, Sillicon & Viton Rubbers.

O Ring
NBR O ring all standard sizes, Ex-Stock. Materials Nitril, Silicon, Viton

Anti Vibration Machine Mounts
Round type mount with top level adjustment & square type (cushy foot) mounts.

Flexible Jaw Coupling with Spider
RIDDHI Spare Spiders in rubber, PVC, Polyurethane also GR Series full range available in PU.

Rubber Cords
Nitrile, Neoprene, EPDM, Silicon, Viton, Rubbre Cords 1mm dia to 40 mm dia Ex-stock.

Silicon Transparent Tube
0.6 mm id to 100 mm id all standard sizes Ex-Storck. Also available Food grade.

Fliexible Shaft Coupling
This shaft coupling connects two shafts to transmit torque, motion etc. It is a coupling which can adjust itself to misalignment of two shafts connected by it.

Fliexible Shaft Coupling
This shaft coupling connects two shafts to transmit torque, motion etc. It is a coupling which can adjust itself to misalignment of two shafts connected by it.

Rubber Bush
Inner MS, Brass Lined, Canvas & Rubber. All standard size rubber bushes Ex- Stock.

Silicon Rubber Sheets
1 Mtr x 2 Mtr x 1mm to 12 mm Thick. 1.2 Mtr x 10 Mtr x 1 mm to 6 mm Thick.

Rubber Pads
4″x4″x 1/2 inches. 6″x6″ x 1/2 inches. 300x300x20 to 50 mm Thick Ex – Stock.

Mechanical Seals
Mechanical shaft seal of DRL (closed) MC type (open) suitable for crompton, sharp,jet, hp monoblock & akash jet pumnps.

Rubber Expansion Joints with Assembly
We can provide Rubber Expansion Joints with Assembly as per the requirments of the clients.

Rubber Bellows
We can provide various kind Rubber Bellows in any shapes like Circular, Rectangular etc..
Factory Manufacturing units
- M.V. hydro Engineering work (No; 12, shop no; 3, A.J.complex ,Zion street, thiruveethi Amman koil street, mannurpet ,padi, Chennai -600050)
- M.V. hydro – seal manufacturing and Industrial Spares Manufacturing & Trading Company (NO 1/1, Anna salai cross street, erukkanchery, Chennai -600118.)
Machinery Service Station
MV Hydro Industries,
182, Gangaiyaamman Kovil Street,
Erulapalayam,
Kuthambakkam Post ,
Thiruvallur-600124
Head office
MV Hydro Industries,
182, Gangaiyaamman Kovil Street,
Erulapalayam,
Kuthambakkam Post ,
(near poonamallee)
Thiruvallur-600124.